Recommended for a wide range of Architectural and Institutional applications where lead shielding is required. The bonded, sanded particle board core offers maximum stability against warpage and telegraphing. Available in a wide variety of veneers including plastic laminate.
MAXIMUM SIZE
(Nonrated) (PCLL)
Single doors 4'0" x 8'0"
Regular and Double Egress Paired doors 8'0" x 8'0"
(20-minute Positive Pressure or Neutral Pressure)
Single doors 4'0" x 8'0"
DOOR THICKNESS
13/4"
STILES
Minimum 11/4 " (before trim) compatible hardwood edges (Matching vertical edges supplied when specified premium grade.)
RAILS
Minimum 2" (before trim) mill option LSL (Laminated Structural Lumber). Matching or compatible hardwood rails are available when specified.
LEAD SHEILDING
Standard 4 lbs with 1/32" (0.8 mm) shielding layered between the core/frame assembly and the face on each side of the door, thereby elimininating the requirement for most shielding of hardware. Heavier shielding available upon request.
BONDED SANDED CORE AND FRAME ASSEMBLY
Particleboard core with an average density of 28 to 32 lbs. Stiles and rails are securely bonded to the core and sanded as a complete assembly prior to the application of the face veneers.
FACES
Architectural Hardwood Veneers (minimum 1/50" veneer before sanding), Plastic Laminate, Medium Density Overlay and Hardboard. Veneers available in a wide variety of species, cuts and assemblies. Customary veneer grading standards meet or exceed WDMA Custom Grade. Note: WDMA Premium, AWI/AWMAC Custom or Premium available upon request.
ADHESIVES
Type I PVA waterproof adhesive.
FACTORY MACHINING/DETAILING
Complete range of machining capabilities and detailing available. Lynden Door, Inc. recommends factory prefitting of all lead lined doors.
LIGHT OPENINGS
Cut-out area may not exceed 40% of the face of the door or half the height of the door to comply with the warranty. Cutouts must maintain a minimum of 5" between the cutout and the edge of the door or any other hardware prep. Light Openings not available with 20 minute positive pressure construction.
WARRANTY
Life of original installation for interior use only. See warranty terms and conditions. Use of Lynden Door, Inc. LD2000LL doors in exterior applications is not recommended or warranted.
NOTE
Architectural doors meet or exceed WDMA. IS1A, AWI / AWMAC, WI and C.S.A. standards.
This text is replaced by the Flash movie.
| Attachment | Size |
|---|---|
| Color LD2000LL.pdf | 2.32 MB |