LD6500 - Agfiber Core 45-Min Positive Pressure Category 'A'

Architectural Door (LD) Series

The LD6500 is a popular door for those specifying fire rated green building products, whether for a standard such as LEED or simply to make an environmentally intelligent choice. It is included here in the GreenDor section as a convenience for those seeking green building materials, and is also listed in the Architectural Door (LD) Series section of the Products tab.

PLEASE NOTE: Until further notice, this product is only available with UP TO a 45-minute label.

APPLICATIONS & BENEFITS

Our new line of Agfiber fire cores are environmentally responsible, designed for sustainable building through the use of a rapidly renewable resource and made for a healthful indoor environment, free of formaldehyde resins. This revolutionary core provides superior screw holding capacity exceeding the performance values of WDMA IS1A-04 Extra Heavy Duty. The LD6500 contributes to LEED NC 2.1 (MR4.1, 4.2, 5.1, 5.2, 6 & EQ4.4)

SPECIFICATIONS Please call for specs

MAXIMUM SIZE
Single doors 3'0" x 8'0"
Note: Positive pressure tested in accordance with UBC-7-97, UL-1OB and UL-1OC

DOOR THICKNESS
1 3/4" standard

STILES
9AP with concealed intumescent and solid hardwood edges matching (compatible with) the face veneer. Maximum 1/4" hardwood (after trim), with minimum 1-1/16" composition inner stile.

RAILS
Top rail: 9AP composite rails with concealed intumescent and outer band of softwood. Maximum 1/4" optional wood outerband, with a minimum 1-9/16 composition (after trim). Bottom rail: Minimum 2" composition (after trim), no wood allowed. Matching (compatible) top rail available upon request.

BONDED SANDED CORE AND FRAME ASSEMBLY
LD-2 Formaldehyde free Greencor Agfiber core with an average density exceeding 30 lbs. Stiles and rails are securely bonded to the core and sanded as a complete assembly prior to the application of face veneers.

FACES
Architectural Hardwood Veneers (minimum 1/50" veneer before sanding), Medium Density Overlay and Hardboard. Veneers available in a wide variety of species, cuts and assemblies. Customary veneer grading standards meet or exceed WDMA Custom Grade. Note: WDMA Premium, AWI / AWMAC Custom or Premium available upon request.

ADHESIVE
Type 1 PVA waterproof adhesive. (No added formaldehyde)

FACTORY MACHINING/DETAILING
Complete range of machining capabilities and detailing available. Doors must be machined in accordance with Warnock Hersey International, Inc. and National Fire Protection Association Standards, (NFPA 80, latest edition) Lynden Door, lnc. recommends factory prefitting of all fire doors.

LIGHT & LOUVER OPENINGS
None available at this time

BLOCKING
No additional blocking is required for surface mounted hardware. The LD6500 core exceeds the Extra Heavy Duty Level per WDMA I.S. 1A-04 with a TM-I0 I990 Screw holding rating of 638 lbs.

WARRANTY
Life of original installation for interior use only. See warranty terms and conditions. Use of Lynden Door, Inc. LD6500 doors in exterior applications is not recommended or warranted.

NOTE
LD6500 construction meets WDMA IS 1A, AWI / AWMAC, and WI. standards.